Whether it's a slow leak that's been eating your subfloor for weeks or a flooded basement at 2am, our Maple Plain crews are already moving. Hirex Water Damage sends licensed technicians straight to your Maple Plain address with extraction equipment already loaded and running.
Hirex Water Damage started because homeowners in Maple Plain, MN kept telling us the same story: a national hotline picked up, put them on hold, and then subcontracted the job out to whoever was cheapest and closest. Every technician on our Maple Plain roster is a Hirex Water Damage employee, not a gig-app contractor pulled from a random directory.
Our senior technicians are IICRC-certified and have worked everything from a clean supply-line break to a full sewage backup, so Structural Drying in Maple Plain isn't a side service we tacked on — it's the reason the company exists. We carry full general liability coverage and are licensed to operate throughout Maple Plain, MN, so you're protected from the moment our truck pulls into the driveway.
We keep a stocked warehouse inside Maple Plain, MN so equipment never has to be trucked in from another region, which is the difference between a 45-minute arrival and a next-day one.
Anyone in Maple Plain who has had a supply line fail overnight knows the real cost isn't the leak itself, it's how long the standing water sits before someone with the right equipment arrives. That's the gap Hirex Water Damage was built to close, one Maple Plain call at a time.
Not every leak announces itself with a flooded floor. A lot of the worst damage we see in Maple Plain started small and got ignored for weeks. Here's what tells us a property needs professional attention rather than a mop and a fan:
If any of that sounds familiar, don't wait for it to get worse — call our Maple Plain line and we'll tell you honestly whether it's a same-day emergency or something we can schedule.
Whether it's one bedroom carpet or an entire flooded commercial floor, our Maple Plain crews scale the response to match the loss — nothing gets a cookie-cutter response.
Our Maple Plain units run truck-mount extraction pumps that pull thousands of gallons per hour, cutting standing-water time from days to hours. Every extraction job includes moisture mapping so we know exactly which materials are still holding water once the visible flooding is gone.
Once water is out, we bring in commercial air movers and LGR dehumidifiers, positioned using psychrometric readings rather than guesswork, with daily drying logs so you can see the numbers improving, not just take our word for it.
For Maple Plain homeowners, that means drywall removal at the flood cut line, subfloor assessment, and content pack-out for anything that can be saved, with clear photo documentation at every stage for your insurance claim.
For commercial Maple Plain accounts, we assign a project lead, run crews after normal hours to reduce downtime, and bring equipment sized to the actual footprint — we know a flooded lobby or a leaking unit above tenants below has to move fast.
Blackwater losses in Maple Plain get handled under strict Category 3 protocol: containment, PPE, antimicrobial application, and documented disposal of contaminated materials.
We apply antimicrobial treatment during every Maple Plain drying job specifically to head off mold before it starts, and we'll flag any area that needs deeper remediation.
Every Maple Plain estimate is written and explained before work begins — no vague "we'll see how it goes" pricing.
Our Maple Plain, MN warehouse keeps drying equipment close, which typically puts a Maple Plain tech at your door inside an hour.
We photograph and log every step specifically so your claim moves faster and you're not the one arguing with the insurance company.
We don't call a job finished until the moisture meter agrees, and if it doesn't, we return at no additional cost.
A short call with our Maple Plain dispatcher tells us whether this is a one-room job or a multi-crew response before anyone drives out.
The closest available technician is routed to your Maple Plain property with equipment staged and ready.
We remove standing water first, then map moisture and position air movers and dehumidifiers based on the readings.
We don't close the file until the numbers confirm the structure is dry, and you leave with full photo and moisture documentation.
Every Maple Plain job gets closed based on instrument readings, not a visual check, and we won't call it finished until the numbers say it's finished. If a callback shows lingering moisture within 30 days of a completed job, we return and correct it at no additional charge.
We put that guarantee directly on the Maple Plain work order, not just in an ad. A repeat visit under this guarantee doesn't mean starting over — we pull the original moisture logs and pick up exactly where the last visit left off.
"Water heater blew at midnight and the Hirex Water Damage crew had extraction equipment running before 1am. Genuinely fast." — Danielle R.
"They dealt with my insurance adjuster directly and I didn't have to translate a single restoration term myself." — Marcus T.
"Appreciated getting real numbers each day instead of someone just saying 'looks good' and packing up." — Priya S.
"A supply line failure flooded our kitchen and this crew had us reopened in under a week — much faster than we expected." — Aaron W.
"Sewage backup is not a fun call to make, but the crew treated it professionally and explained the whole containment process." — Lena G.
"The quote matched the final invoice exactly. No surprise charges tacked on at the end." — Sam O.
Local staging inside Maple Plain, MN typically gets a Maple Plain technician on-site inside an hour or two, depending on traffic and time of day.
We always quote first. You'll see a written estimate for the Maple Plain job before any drying equipment starts running.
Emergency extraction, structural drying, and sewage/contaminated water cleanup are all available 24/7 for Maple Plain properties.
Yes, we document everything with photos and moisture readings and can communicate directly with your adjuster.
We take moisture meter readings on affected materials and compare them against the dry standard for that material type — a visual check alone isn't enough.
Yes, our Maple Plain crews are trained and equipped for Category 3 blackwater response, including PPE and antimicrobial treatment.
If it's safe, shut off the water source, move electronics and valuables away from the affected area, and avoid the space if standing water is near outlets.
Yes, we regularly respond to commercial and multi-unit losses in Maple Plain, including retail, restaurants, and office space.
Typical drying time runs 3-5 days for a Maple Plain home, though a job that sat unaddressed longer can take longer to fully dry.
Mold isn't inevitable, but the window to prevent it is narrow, which is why we treat speed as part of the Maple Plain service, not an upsell.
Our Maple Plain guarantee covers a 30-day callback window — if moisture shows up again from the same loss, we come back free of charge.
See the zip codes and nearby cities listed below — our Maple Plain crews cover that full radius.
Maple Plain is our home base, and our reach extends across Maple Plain, MN through a network of staged equipment and on-call technicians. If your address falls inside or near Maple Plain, a Hirex Water Damage crew can typically respond the same day.
— Embedded service-area map for Maple Plain, Maple Plain, MNOne call gets you a Maple Plain-based team, not a routed national queue.
Call +1-844-234-5373